“king drains” or auto drains are common. A short nipple and either a brass cross-top or pvc ball valve would be better. Just be sure that it is accessible in the end.
“king drains” or auto drains are common. A short nipple and either a brass cross-top or pvc ball valve would be better. Just be sure that it is accessible in the end.
That soundtrack still slaps.
Hollow doors have about a 1" frame of solid wood around the perimeter.
If the door frame is not currently falling out of the opening there’s enough meat in the opening to mount a new one. Fondots is right. Re mortising well for the hinges and modifying the door to fit will be more effort than getting a pre-hung.
No they won’t!
Picture looks like real wood and not paper, hardie or vinyl. Venat0r has the right idea of taking a sample in to your local yard. A couple possibilities I came across online are https://www.becn.com/products/siding/wood-siding/C-503734 and https://truwoodsiding.com/products/1-2-cedar-shake-lap-siding/ although the online pictures are garbage for them.
He’s gonna cry himself to sleep on his huge pillagh!
In USA I usually get Printed solid’s Jesse and 3D Printing Canada’s Budget PLA. I also pick up a couple rolls of Inland any time I’m by my local Microcenter
Filament sourcing is pretty region specific. Where are you buying from?
111 is always “eleventy first” to me.
I also always have a sharpie on me and often use it to fix the missing labels on these pumps.
Surgeons already aren’t allowed to put non FDA approved things in you. You would go to a tattoo/piercing shop for that sort of thing.
Heavy on the “peer”, light on the “review”
I worked as a handyman out of a camry. It is possible, but not pleasant.
It’s like telling an office worker that they need to work at a coffee table.
I voted for that bowl of tapioca once and I’ll do it again.
They are typical as low-point drains and manifold drains, both on the main line (always charged). Don’t just cap it if that would make a dead end, especially if it’s sloped down to drain. I can’t tell very well from the picture, but if it’s on a tee you would be okay putting in a threaded cap.