What you said + nicer motherboards often come with bios flashback which should (IMO) be a mandatory feature for motherboards on platforms like AM4. Makes CPU compatibility much better since a supported bios version can be flashed anytime, no matter what CPU is currently installed (if a CPU is installed at all!).
Haven’t heard anyone say chelatchie out loud before, but I live in the pnw and I would guess it would be pronounced cheh-latch-ee, which is similar to how “Wenatchee”, a pnw city, is pronounced (not helpful but interesting nonetheless).
I should have clarified that they were both part of the same kit, with no other cloths provided.
Also, what I do is pretty much the same as what Zeiss says to do in their instructions, see this video link (couldn’t find written instructions on their site): https://www.zeiss.com/vision-care/us/need-new-eyeglasses/eyeglass-cleaning-solutions.html#overlay-benefits-832427451
Lastly, what do you mean by using the spray and cloth apart? Do you mean using the cloth dry? Because that is even greasier than using the spray+cloth.
When I tried to use it, I sprayed the Zeiss spray onto a Zeiss supplied microfiber cloth (was part of a kit I got from an optometrist), wipe the glasses, then use a dry part of the microfiber cloth to wipe it away. I don’t think a more absorbent cloth would help much since it’s a greasy residue. Plus, other sources tell me that I shouldn’t use anything other than microfiber to clean my glasses. The spray just seems like a poorly formulated product that can’t cut through grease like dish soap or the Zeiss disposable wipes.
I generally use a similar method to this to deep clean my glasses, but I often don’t want to do that deep of a clean all the time since my glasses get dirty fast. I find the Zeiss glasses wipes work well for me, but there is a lot of waste involved. Oddly enough, their cleaning spray works terribly for me, and it seems to just spread grease around the lenses…
I was looking at the ingredients for each, and it seems that Zeiss used different ingredients for the two products. The wipes contain water, isopropyl alcohol, and “proprietary detergents and preservatives”. The cleaning spray contains water, butyl diglycol, and two other ingredients that to my knowledge are just preservatives. I think that in theory I could make a better cleaning spray by getting the right concentration of isopropyl alcohol and distilled water, mimicking the concentration in the wipes. What do you think is the highest percentage of isopropyl alcohol that I could safely use on glasses without damaging coatings?
Odd. I’ve tried the Zeiss spray+microfiber cloth before, and it just didn’t work for me. It leaves greasy smudges on my lenses. I’ve found that only dish soap or the Zeiss disposable wipes actually left a clear and clean lens. Are you using Zeiss spray or a different lens cleaner?
Yeah it’s pretty wasteful. I’ve tried the Zeiss spray+microfiber cloth, but I haven’t had the greatest luck with it. I tried to use it just now to remind myself what it’s like, and I find that it spreads a thin greasy residue on my lenses.
Cleaning with dish soap is only a bit more effort and is much more effective in my experience (my glasses feel brand new afterwards). The Zeiss wipes get most of the way there usually, but I sometimes need two instead of one.
I use microfiber cloths, dawn dish soap, and water for a deep clean every once in a while. The microfiber cloth kinda gets cleaned in the process. I then use a second dry microfiber cloth to dry it off and prevent water spots on the lenses. Unfortunately I have to shake out my glasses before drying since water gets stuck in between my frames and my lenses.
For quicker cleaning, I use those Zeiss glasses wipes, though not entirely sure if getting brand name is important or not.
Looks really nice. Where did you get the keycap set? I have a V6 (lower end version of the Q6) and I have been looking for a full size keycap set that includes the four macro keys. Unless they were an add-on of some kind?
I think it is more likely that the act of taking the cartridge out and reinserting scrapes away at grime that is stuck on the pins, creating better contact with the connector in the console. Blowing into them likely did nothing.