This, by far, was the biggest factor for me quitting anime, but also, it hasn’t evolved or changed at all since the 2000s. It’s all the same tired tropes and stereotypes. Throw in a few dashes of misogyny and bam, top anime apparently.
I was going to invest myself, but I already lost $20,000 investing in the NFTs. Best purchase ever.
I doubt it. But I really hope that translates to micro transactions are illegal now.
If you only get the $70 standard edition? No. If you dish out $115 for the mega deluxe edition? Also, no. If you buy the $15 battle pass each month, still, no.
So that’s all crackheads, not just my brother?
Could try rotating the model 90°. If the issues remain in the same location, you’ll know it’s a printer issue, maybe due to the size of the radius.
That may have been a quirk due to compiling my own. I believe I did that because I found myself in a similar situation of not seeing a more recent firmware. If you decide to replace this one, I’d recommend an anycubic. Got a Kobra 2 NEO, and it works great straight out of the box. Similar price range, too, $150-$200.
I’ve owned a g502 for over a decade now. I know their products are such shit now, I don’t know what I’ll do when it breaks. Definitely not get a mouse subscription, at least
I bought a bl touch a few years ago. Decent printer. I updated the firmware and added a bl touch. That’s when it all went wrong. I now recommend staying away from biqu as their customer service is non-existent. To your problem, as stated by another commenter, get an updated firmware from biqu’s site. I compiled my own, which may explain some of my issues. My initial issues came with the probe offset. I dug a deep line in my plate and took several attempts to realize that I need to change my offset only in the machine parameters, not in the abl menu.
There’s only one solution. Shut off all power, and the piss jug will leave and make its way to cancun.
With how much scraping of reddit they do, there’s no way it doesn’t try ordering a poop knife off of Amazon for you.
But how would a capitalist benefit from that?
My only idea of the top of my head is trying another heater block. Make sure you use thermal paste as well to help with heat transfer. I know those probably won’t help, though. I posted, though, to mention I was running a BIQU B1(Peice of Crap) using BIQU’s HS2 V2 lite(love that, though) extruder. One print went fine, and then I was suddenly overextruding. I had to change my steps from 930 to 250 or so. Then, after powering down and turning back on, my number needed to return to the 930 value. Very weird, especially without a shutdown.
Cronenberg Capitalism?
Toss a few jalapeños on it as well.
10% of global earnings? Isn’t it losing money? Makes it sound like they’re paying him.