PlutoniumAcid@lemmy.world to 3DPrinting@lemmy.worldEnglish · 10 months agoLet's hear some fun ideas for confusing connector sleeves!i.imgur.comimagemessage-square202fedilinkarrow-up11.58Karrow-down113
arrow-up11.57Karrow-down1imageLet's hear some fun ideas for confusing connector sleeves!i.imgur.comPlutoniumAcid@lemmy.world to 3DPrinting@lemmy.worldEnglish · 10 months agomessage-square202fedilink
minus-squareArbitraryValue@sh.itjust.workslinkfedilinkEnglisharrow-up16arrow-down2·10 months agoPrint USB-A sleeves with the logo on the wrong side. People will be so surprised and confused when they can’t plug the cable in on the first try!
minus-squareSquirrel@thelemmy.clublinkfedilinkEnglisharrow-up20·10 months ago…There’s a logo on one side?
minus-squareshalafi@lemmy.worldlinkfedilinkEnglisharrow-up8·10 months agoHah! I never noticed the logo thing, I always aim with the metal seam facing down. Rarely fails.
minus-squarepoppy@lemm.eelinkfedilinkEnglisharrow-up2·10 months agoWhat about when it’s vertically oriented
minus-squareXTL@sopuli.xyzlinkfedilinkEnglisharrow-up1·10 months agoUp is still up. The circuit board is the frame of reference, not the floor of the room.
Print USB-A sleeves with the logo on the wrong side. People will be so surprised and confused when they can’t plug the cable in on the first try!
…There’s a logo on one side?
Hah! I never noticed the logo thing, I always aim with the metal seam facing down. Rarely fails.
What about when it’s vertically oriented
Left
Up is still up. The circuit board is the frame of reference, not the floor of the room.